Fig. 5.8.1.1.1. - Specify Layout Name Window - ETC M521 User Manual

M520 series oscilloscope with rollmode
„File | Close" – Terminates the print manager
5.8.1.1. Setting the name of a new layout
To open the Specify layout name dialog window, select the "Layout | Save
layout as" item. Now you can enter the name of the new scheme.

Fig. 5.8.1.1.1. - Specify Layout Name Window

It is necessary to insert a name of the new layout into the "New layout" box.
This name has to differ from the names of the existing layouts. If the name would be
identical with the name of another layout, this layout would be replaced by the new
layout. At the same time the existing layout would be highlighted in the layout list. If
you click a name of a layout in the list, this name will appear in the "New layout"
box.
To save the layout, click the OK button.
5.8.1.2. Layout Manager
To open the Layout Manager window, select the "Layout | Manage layouts"
item in the main menu of the print manager window.
User's Guide
- 35 -