Table of Contents
Advertisement
M520 series oscilloscope with rollmode
User's Guide
1. Installation
1.1. Requirements
Minimum configuration:
- PC PENTIUM compatible computer with speed of at least 300MHz
- 64MB RAM
- CD-ROM
- VGA with resolution 800 x 600
- USB port
- mouse or other tracking device
- at least 20MB free space on the hard drive
- MS Windows 98 SE, ME, 2000 or XP
Recommended configuration:
- PC PENTIUM compatible computer with speed of at least 1.5GHz
- 128MB RAM
- CD-ROM
- VGA with resolution at least 1024x768
- USB port 2.0
- mouse or other tracking device
- at least 20MB free space on the hard drive
- MS Windows 98 SE, 2000 or XP
1.2. Hardware installation
Connect one side of the cable to the computer, other one to the device. Proceed
with the software installation.
WARNING: Always use cable, which is the part of the package. Usage of the
improper cable can disable communication with the computer.
1.3 Software installation
The software and the device drivers are located on the enclosed CD. Insert the CD
into the CD-ROM drive. Then follow the instructions of the setup program that should
launch automatically. If the CD autorun option is not enabled in your computer's
settings, please run file autorun.exe from the CD.
- 7 -
Advertisement
Table of Contents
