Software Upgrade - Daewoo DN-W552 Service Manual

Adjust Screws", as they are adjusted precisely at the factory.
1.3.2.3. Replacement of the Pickup Block is impossible. Always replace
the Traverse Ass'y when the Pickup Block needed to be replaced.
Do not touch the lens or lens holder of the Pickup Block.
1.3.2.4. The Guide Rails of the Pickup Block are greased. Take care
when handing.
1.3.2.5. When you try to slide the Pickup Block, do not press or pull it
directly. Always turn the dive gears with your fingers.
1.3.2.6. Be sure that the anti-slipping rubber on the turntable or clean. If
there is dust or it is greasy, clean the part with the liquid that
contains 50% each of alcohol and water.
When removing the Mechanism P.C.B. Ass'y, you need to
1.3.2.7.
short-circuit the laser diode shorting lands beforehand.

1.4. Software Upgrade

You can upgrade DVD Player using the software we provide as following step:
― Creating a software upgrade CD
― Use only a new CD-R/CD-RW(not an erased one).
― Give the CD a name of your choice(e.g. version and unit name).
― Burn the unpacked documents on the CD-R/CD-RW.
― The root directory(uppermost level) of the software upgrade CD
Attention: If a failure should occur during the software upgrade (e.g. a mains failure), it may
happen that the units function and a restart of the upgrade function are no longer possible. If this
should be the case, you must replace the intergraded FLASH ICs with preprogrammed ICs (see
corresponding spare parts list).
─ Insert the upgrade CD (see corresponding spare parts list) and observe the hints on the display
and on the screen of the TV set.
─ Carry out an initialization of the set.
Displaying the Software Version Number
― Press one after the other the "STOP" and "EJECT" buttons on the unit.
― Press the"OSD" with the remote control.
― Using the cursor buttons on the remote control, select the software version "MICRO Version"
or "CUSTOMER VERSION" .The respective software version number then is displayed
Daewoo DN-W551 Service Manual
4