Measurement Preparation (Selecting The Activity Type) - Epson ProSense J-307 User Manual

J-307 User Manual

Measurement preparation (selecting the Activity Type)

At the Time screen, press the DOWN button to select the activity type.
The following table lists the available activities.
Activity Type
Running (Run)
Walking (Walk)
Treadmill (Treadmill)
The device will begin GPS positioning once an activity is selected. The Measurement screen appears once the GPS
positioning is complete.
Note
The device will display the Measurement screen without performing GPS positioning when Treadmill is selected.
c
Important
❏ Make sure the screen is facing up and you are outside with no obstructions overhead when performing GPS
positioning.
U
"GPS signal reception (GPS positioning)" on page 27
❏ If the device fails to acquire a GPS signal, the "Locating GPS Failed" message appears. Press the BACK button
to try and acquire the GPS signal again. To continue your measurement without using GPS positioning, press
the ENTER button.
❏ To start your measurement without waiting for the device to finish GPS positioning, press the START/STOP
button at the screen that appears while the device acquires the GPS signal. The device will not be able to track
your route while the device is still performing GPS positioning. The device will begin tracking your route as
soon as it finishes GPS positioning.
U
"Measurable items" on page 33
Measuring Your Workout
Explanation
Jogging, running, marathons, etc.
Walking
Jogging or running on a treadmill
36