Table of Contents
Advertisement
Preparation
C
The best washing
performance in dishwashers
is obtained by using
detergent, rinse aid and water
softening salt individually.
C
Observe the instructions of
the detergent manufacturer
on the package when using
tablet detergents.
C
Contact the detergent
manufacturer if your dishes
are wet and/or if you notice
limescale spots particularly
on your glasses after the
washing programme is
over when using a tablet
detergent.
When you switch to powder
detergent from tablet detergent:
1. Make sure that salt and rinse aid
reservoirs are full.
2. Set the water hardness to the
highest level and perform an empty
run.
3. After the empty washing cycle,
review the user manual and
readjust the water hardness level so
as to suit the water supply.
4. Make the appropriate rinse aid
settings.
18
/44 EN
Rinse aid
C
The rinse aid used in
dishwashers is a special
combination that aims to
increase drying efficiency and
prevent water or lime stains
on the washed items. For this
reason, care must be paid
to have rinse aid in the rinse
aid reservoir and to use rinse
aids produced specially for
dishwashers only.
1. Open the lid of the rinse aid
reservoir with the help of the latch.
2. Fill the reservoir until "MAX" level.
3. Slightly press the point (B) of the
reservoir lid to close it.
Dishwasher / User manual
Advertisement
Table of Contents
