NEC UM361X User Manual page 136

7. Maintenance
To replace the filters:
NOTE:
• Replace all four filters at the same time.
• Before replacing the filters, wipe off dust and dirt from the projector cabinet.
• The projector is precision equipment. Keep out dust and dirt during filter replacement.
• Do not wash the filters with soap and water. Soap and water will damage the filter membrane.
• Put filters into place. Incorrect attachment of a filter may cause dust and dirt to get into the inside of the projector.
Before replacing the filters, replace the lamp. (→ page 122)
1. Push the button rightward to release the filter cover and pull
it out.
Button
2. Remove the two filter cases.
Tab
Small filter case Large filter case
Tab
125