Chamberlain NDIS User Manual page 2

Assemble
INTERCOM
Install 4 AA Alkaline batteries
1
(not provided).
2
Adhere rubber pads to bottom.
Repeat Steps 1 and 2 for any
additional intercoms.
Program Intercom to Doorbell
1 Press the Learn button on the
intercom until a beep is heard.
Mount Doorbell
The doorbell can be mounted by using the included screws or by using the double-sided mounting tape. It is recommended to use the
mounting tape on surfaces such as metal or glass.
MOUNTING WITH SCREWS
Mount doorbell with small
1
silver screws. Screw the top
two screws halfway into the
mounting surface. Place back of
doorbell over screws. Tighten
screws.
Put the remaining silver screws
2
into the bottom holes of
doorbell. Tighten screws.
Secure Cover
1 Secure cover with the two large
black screws.
DOORBELL
Install 4 AA Alkaline batteries
1
(not provided). (Lithium
batteries recommended for
colder environments.)
2 Within 10 seconds press the
Learn button on the doorbell
until a beep is heard.
MOUNTING WITH TAPE
Clean back of doorbell and
1
mounting surface using the
alcohol wipe.
2 Peel off white paper from
mounting tape. Firmly press
mounting tape on back of
doorbell.
Peel paper from mounting tape.
3
Firmly press doorbell onto
mounting surface.
2