Brother MW-260 User Manual page 12

!
This printer is powered with a Recharge Lith-
ium-ion Battery. If this printer can only be used
for a short period of time, even though it is
fully charged, the battery may have reached
the end of its service life. Replace the
Recharge Lithium-ion Battery with a new one.
When replacing the battery, disconnect it by
affixing tape to the terminals that contact the
printer.
Concerning the AC adapter
!
Only use the AC adapter designed specifically for this
printer, otherwise fire, electric shock or damage may result.
!
Do not plug the printer into an electrical outlet other than a
household outlet (AC 110 V
tric shock or damage may result.
!
Do not touch the AC adapter or the power supply plug with
wet hands, otherwise electric shock may occur.
!
Do not try to disassemble, alter or repair the AC adapter,
otherwise fire, electric shock or injuries may result.
For servicing, adjustments or repairs, contact the sales
representative where the printer was purchased.
Others
Warning
–
120 V), otherwise fire, elec-
Precautions
Li-ion
xi