Table of Contents
Advertisement
Customizing settings
Menu Settings
-Quick Settings
1
To view the OSD menu, press the joystick button at the
bottom of the monitor and then enter the Menu.
2
Go to Quick Settings >
3
Configure the options following the instructions that appear in the
bottom right corner.
4
To return to the upper menu or set other menu items, move the
joystick to ◄ or pressing (
5
If you want to exit the OSD menu, move the joystick to ◄ until you
exit.
Each option is described below.
Menu > Quick Settings
Brightness
Contrast
Volume
Ratio
SMART ENERGY
SAVING
* SMART ENERGY SAVING : Conserve energy by using luminance compensation algorithm.
NOTE
The display may look the same for Wide, Original options at the recommended resolution (1920 x
y
1080).
The ratio is disabled in the interlaced signal.
y
NOTE
The value of energy saving data may differ depending on panel and panel suppliers.
y
If you select the option of SMART ENERGY SAVING is High or Low, monitor luminance become
y
lower or higher depend on source.
by moving the joystick.
Brightness
/ OK) it.
Adjusts the color contrast and brightness of the screen.
Adjusts the volume.
NOTE
Jog joystick button down (
y
the Mute function.
Adjusts the screen ratio.
Wide
Displays the video in wide-screen, regardless of the video signal input.
Original
Displays a video according to the input video signal aspect ratio.
High
Enables SMART ENERGY SAVING you can save energy with this energy- high efficient
function.
Low
Enables SMART ENERGY SAVING you can save energy with this energy- low
efficient function.
Off
Disables SMART ENERGY SAVING .
CUSTOMIZING SETTINGS
Description
) in the Volume menu will enable/disable
19
A
Confi
Advertisement
Table of Contents
