Related Manuals for Artila Matrix-512
Summary of Contents for Artila Matrix-512
- Page 1 Matrix-512 Linux ARM9 Industry Box Computer User Guide Version 1.0 Copyright © Artila Electronics Co., Ltd. All Rights Reserved.
-
Page 3: Table Of Contents
3.13 Network Settings ......................... 6 3.14 Wireless LAN Configuration ....................6 3.15 File System ......................... 7 3.16 Devices List ......................... 8 3.17 Utility Software ........................8 Artila Utility Software ....................9 update ..........................9 setuart ..........................9 gpioctl ..........................9... - Page 4 SSH Console ........................11 4.10 Install GNU Toolchain ....................... 11 4.11 Getting Started the Hello Program ..................11 Frequently Asked Question ..................13 Forgot Password ....................... 13 Reset Matrix-512 to Factory Default Setting ..............13 Forgot the IP Address ....................... 13...
-
Page 5: Introduction
Matrix-512 User Guide 1. Introduction Matrix-512 is an ARM9-based Linux ready industrial computer. The key features are as follow: ARM920T ARM Thumb Processor with 200MIPS at 180MHz, Memory Management Unit 16-KByte Data Cache and 16-KByte Instruction Cache ... -
Page 6: Layout
Matrix-510 User Guide 2. Layout Reset Button 12.5 167.5 ‧2‧... -
Page 7: Pin Assignment And Definition
The Power LED will show solid green if power is properly applied. 3.3 Ready LED The Ready LED will show solid green if Matrix-512 complete system boot up. If Ready LED is off during system boot up, please check if power input is correct. Turn off the power and restart Matrix-512 again. -
Page 8: Serial Console Port: (P3)
Terminal type: ANSI The console cable can be ordered and its part number is 91-DBCON-100. Its configuration can be found at document Matrix-512 console cable. 3.9 Enable / Disable Serial Console Port The serial console port is disabled as factory default setting. To enable the serial console, you need to purchase or prepare a serial console cable and connect it to port 3. -
Page 9: Serial Port (Db9 Male)
Matrix-512 User Guide 3.10 Serial Port (DB9 Male) Pin No. RS-232 RS-422 RS-485 Port 1~4 DCD* TXD- TXD+ RXD+ DATA+ DTR* RXD- DATA- Note: * Port 2 only DSR* 3.11 Digital I/O Port (DB25 Female) Pin No. RS-232 Pin No. -
Page 10: Factory Default Settings
For infrastructure mode XXXX is the access point name and YYYYYYYY is the encryption key and MMMM should be managed. For Ad-Hoc mode mode XXXX is Matrix-512, the device name and YYYYYYYY is the encryption key and MMMM should be ad-hoc. -
Page 11: File System
192.168.2.127 netmask 255.255.255.0 3.15 File System Matrix-512 configures the root file system as RAMDISK and the user disk (/disk) which includes /home and /etc directory are configured as Flash Disk. To find out the file system information, please use command /mount as show as above. -
Page 12: Devices List
5. ttyUSB0 to ttyUSB1: USB RS-232 adaptor (fdti_sio.ko) 6. rtc: Real Time Clock 7. gpio: General Purpose digital I/O 8. ttyACM0 and ttyACM1: USB Modem (CDC compliant) 3.17 Utility Software Matrix-512 includes busybox utility collection and Artila utility software as follow: ‧8‧... -
Page 13: Artila Utility Software
Matrix-512 User Guide 4. Artila Utility Software The introduction of Artila utility software as follow: 4.1 update Update loader, kernel or root file system image. Also use update —FORMAT to format user disk. Type update—help to find the command usage. - Page 14 You might also find utility software available on Artila FTP under /Matrix & iPAC/utility such as ntpclient, ssh, scp, bluez and ssh-keygen. If you want, you can ftp or copy the utility software to Matrix-512 user disk (/disk). Also you can use find the source code and use the GNU Toolchain to make the utility by yourself.
- Page 15 Matrix-512 toolchain. #tar zxvf arm-linux-3.3.2.tar.gz 4.11 Getting Started the Hello Program There are many example programs on Artila FTP. To compile the sample you can use the Make file to and type: make To compile and link the library. Once done, use ftp command ftp 192.168.2.127...
- Page 16 Matrix-512 User Guide ‧12‧...
- Page 17 To format disk. 5.3 Forgot the IP Address If you forgot the Matrix-512 IP address, you can use the Java Manager available on Artila FTP to search the IP address of Matrix-512. Or use serial console port to find out the IP address by #ifconfig.
Need help?
Do you have a question about the Matrix-512 and is the answer not in the manual?
Questions and answers