Installing The Wall Mount - LG 32MP58HQ-P.AUS Owner's Manual

NOTE
Tilt from +10 to -5 degrees up or down to adjust
the angle of the Monitor set to suit your view.
Front
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
You can obtain it from most electronics stores.

Installing the wall mount

Before installing the wall mount, please separate
the stand hinge first as below.
1
2
3
Rear
ASSEMBLING AND PREPARING
Place the screen face down. To protect the
screen from scratches, cover the surface with a
soft cloth.
Detach the screw cover as below.
Remove the screws and separate the stand
hinge.
13