Table of Contents
Advertisement
8
Installing the Wall Mount Plate
This monitor meets the specifications for the wall mount plate or other compatible
devices.
NOTE
•
The wall mount plate is sold separately.
•
For more information on installation, refer to the wall mount plate's installation
guide.
•
Be careful not to apply too much force while mounting the wall mount plate as it
may cause damage to the screen.
•
Remove the stand before installing the monitor on a wall mount by performing the
stand attachment in reverse.
Installing on the Wall
Install the monitor at least 100 mm (3.94 inches) away from the wall and leave
about 100 mm (3.94 inches) of space at each side of the monitor to ensure
sufficient ventilation. Detailed installation instructions can be obtained from your
local retail store. Alternatively, please refer to the manual for how to install and set
up a tilting wall mounting bracket.
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
100 mm
(3.94 inches)
To install the monitor to a wall, attach a wall mounting bracket (optional) to the back
of the monitor.
Make sure that the wall mounting bracket is securely fixed to the monitor and to the
wall.
1
If you use screws longer than the standard length, it may damage the inside of
the product.
2
A non-VESA standard screw may damage the product and cause the monitor
to fall. LG Electronics is not liable for any accidents relating to the use of non-
standard screws.
Wall Mount (mm)
100 x 100
Standard screw
M4 x L10
Number of screws
4
Wall Mount Plate (Optional)
LSW 149
Advertisement
Table of Contents
