Showtec PSA-32A6C Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the Three Phase Power Network ....................4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Frontside..................................6 Backside ..................................
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec PSA-32A6C with the power cable (1,5 m) User manual Safety Instructions Every person involved with the installation, operation and maintenance of this device has to: ...
Page 4
If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
Showtec PSA-32A6C Operating Determinations This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light-output and the illuminated surface must be more than 0.5 meter.
Showtec PSA-32A6C Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Showtec PSA-32A6C Description of the device Features The Showtec PSA-32A6C is a power distributor providing real-time voltage and amperage information during your show. Power distributor for 3P + N + PE 400VAC, 32A max Road suited housing and components ...
Maximum load 16A. Total load for all sockets on L3 together should not exceed 32A per phase. 14) Power input Connect to the three phase mains. Be sure the total load connected to the PSA-32A6C does not exceed 32A per phase. You can use the built-in ampere meters to check.
Showtec PSA-32A6C Installation Remove all packing materials from the PSA-32A6C. Check if all foam and plastic padding is removed. Screw the equipment into a 19-inch rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing.
Showtec PSA-32A6C Product Specification Model: Showtec PSA-32A6C Power supply: 400V 50Hz/60Hz Max. power input: 32A/Phase Dimensions: 483 x 198 x 132 mm (LxWxH) 19 inch x 3HE (LxH) Weight: 7,64 kg Operation Input: 1,5m H07RN-F 5G6 cable + CEE male 3P+N+PE...