Related Manuals for SHOWTEC PSA-125A4C
Summary of Contents for SHOWTEC PSA-125A4C
- Page 1 MANUAL ENGLISH PSA-125A4C Ordercode: 50667 Highlite International B.V. – Vestastraat 2 – 6468 EX – Kerkrade – the Netherlands...
-
Page 2: Table Of Contents
PSA-125A4C Table of contents Warning ....................................2 Safety Instructions ................................. 2 Operating Determinations ............................4 Connection with the Three Phase Power Network ....................4 Return Procedure ................................5 Claims ....................................5 Description of the device ..............................6 Overview ..................................6 Frontside.................................. -
Page 3: Warning
Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec PSA-125A4C User manual Safety Instructions Every person involved with the installation, operation and maintenance of this device has to: ... - Page 4 If your Showtec device fails to work properly, discontinue use immediately. Pack the unit securely (preferably in the original packing material), and return it to your Showtec dealer for service.
-
Page 5: Operating Determinations
PSA-125A4C Operating Determinations This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The maximum ambient temperature t = 35°C must never be exceeded. -
Page 6: Return Procedure
PSA-125A4C Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility. -
Page 7: Description Of The Device
PSA-125A4C Description of the device Features The Showtec PSA-125A4C is a power distributor providing real-time voltage and amperage information during your show. Input: 1 x CEE male 125A 3P+N+PE, 400V AC, 50/60Hz Output: 4 x CEE female 63A 3P+N+PE, 400V AC, 50/60Hz ... -
Page 8: Frontside
PSA-125A4C Frontside Fig.02 01) L1 voltage & amperage LED display 02) L2 voltage & amperage LED display 03) L3 voltage & amperage LED display 04) Main Circuit Breaker (MCB) 4 x 125A Main Circuit Breaker. It will disconnect the device from the mains if the load current per phase exceeds 125A. -
Page 9: Backside
125A per phase. 13) Power Input Connect to the three phase mains input. Be sure that the total load connected to the PSA-125A4C does not exceed 125A per phase. You can monitor that by looking at the displays on the front panel. -
Page 10: Installation
PSA-125A4C Installation Remove all packing materials from the PSA-125A4C. Check if all foam and plastic padding is removed. Screw the equipment into a 19-inch rack. Connect all cables. Always disconnect from electric mains power supply before cleaning or servicing. Damages caused by non-observance are not subject to warranty. -
Page 11: Product Specification
PSA-125A4C Product Specification Model: Showtec PSA-125A4C Max. power input: 125A/Phase Dimensions: 482 x 400 x 267 mm (LxWxH) 19 inch x 6HE (LxH) Weight: 17 kg Operation Input: 1 x CEE male 125A 3P+N+PE, 400V AC, 50/60Hz Output: 4 x CEE female 63A 3P+N+PE, 400V AC, 50/60Hz... - Page 12 ©2016 Showtec...
Need help?
Do you have a question about the PSA-125A4C and is the answer not in the manual?
Questions and answers