LG WFS1259ET Owner's Manual page 29

Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber
packing within the hose can adhere completely to
the tap
2
Connect the water supply hose to tap.
Connect the water supply hose to the tap and then
tighten it by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check
for any water leakage.
Connecting Water Supply Hose to the machine
• Connect the water supply hose to inlet valve of the
washing machine, and then lock it by turning the hose
connecting part.
• Check to see if there is rubber seal inside the connector.
Water tap
Rubber Packing
Water Supply Hose
Hose connector
29
Rubber seal