Table of Contents
Advertisement
Biostar T-Series
2.3
P
ERIPHERALS
A. Card and I/O Slots:
Floppy Disk Connector: FDD1
The motherboard provides a standard floppy disk connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types. This connector
supports the provided floppy drive ribbon cables.
BIOS
Codec
Hard Disk Connectors: IDE1/IDE2
The motherboard has two 32-bit Enhanced PCI IDE Controllers that provide
PIO Mode 0~4, Bus Master, and Ultra DMA 33/66/100/133 functionality. It
has two HDD connectors IDE1 (primary) and IDE2 (secondary). The IDE
connectors can connect a master and a slave drive, so you can connect up
to four hard disk drives. The first hard drive should always be connected to
IDE1.
BIOS
Codec
2
34
1
33
IDE2
39
1
40
2
IDE1
5
Peripheral Component Interconnect Slots: PCI1~PCI3
This motherboard is equipped with 3 standard PCI slots. PCI stands for
Peripheral Component Interconnect, and it is a bus standard for expansion
cards. This PCI slot is designated as 32 bits.
BIOS
Codec
PCI-Express Slots
PCI-EX16:
PCI Express 1.0a compliant.
-
Maximum bandwidth is up to 4GB/s per direction.
-
PEX1-1/PEX1-2:
PCI Express 1.0a compliant.
-
Maximum bandwidth is up to 250MB/s per direction.
-
BIOS
Codec
TForce4/ TForce4 U
PCI1
PCI2
PCI3
PCI-EX x1
PEX1-2
PCI-EX x1
PEX1-1
PCI-EX16
User's Manual
Advertisement
Table of Contents
