LG GCWP1069CD Owner's Manual page 59

PROGRAMMING MODE -
Diagnostic tests:
This program has been added for testing the washer and detecting errors.
Entering the test mode
Data Name
1. Entering
Entering
programming mode
the test mode
2. Hot
3. Start
1.
According to pressing Start button, test move to the next step.
Number of times the
START button is pressed
None
Turns on all lamps and locks the
1 time
door
2 times Tumble Clockwise.
3 times Low Speed Spin
4 times High Speed Spin
5 times Inlet valve for main water turns on.
6 times Inlet valve for hot wash turns on.
7 times Inlet valve for softener turns on.
8 times Inlet valve for bleach turns on.
9 times Tumble counter clockwise.
10 times Turn on Circulation Pump.
11 times Drain Pump turns on.
12 times Turns on all lamps.
13 times Button Checks.
14 times High Speed Spin
15 times
16 times
NOTE
• Make sure the drum is empty when a diagnostic test is performed. Do not use
(display)
Button Display
Check Point
PDA Signal Check
PROGRAMMING MODE - TEST MODE
TEST MODE
Description
Insert service card (card type), turn on/off
toggle switch (Coin type).
Press the Hot button. Then
in the display.
Enter the diagnostic test mode.
Display
Displays 1U:XX, 1g:XX and 12:X0
alternately (Version)
rpm (40~50)
rpm (600)
rpm (1150)
Water level frequency (255~)
Water level frequency (255~)
Water level frequency (255~)
Water level frequency (255~)
rpm (40~50)
Water level frequency (255~)
Water level frequency (255~)
Displays 1U:XX, 1g:XX and 12:X0
alternately
rpm (1150)
this function is not applied in this
machine
59
appears
.