Table of Contents
Advertisement
16. Rinsing times per cycle
Entering set up
mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous rinsing times per cycle.
Press Warm(+) or Cold(-) button to select rinsing times
per cycle. (Max 5, Min 1)
Press the Start button.
The machine sets up the rinsing times per cycle, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type – Turn on/off toggle switch.
• Card type – Insert the service card.
• OPL type – Push the Hot button twice.
PROGRAMMING MODE - SETUP MODE
Button
Display
appears
appears
47
Advertisement
Table of Contents
