Memory module
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
For access, remove these parts in order, if any:
• "Computer cover" on page 65
• "Bottom cover" on page 72
Replacement procedure
Note: During the installation, ensure that you align the memory module to the slot and press down on both
ends until the latches are fully engaged with a click.
M.2 solid-state drive
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
Before you open the computer cover, turn off the computer and wait several minutes until the computer is
cool.
.
73
Chapter 6
Hardware removal and installation