LG 55XS2B-B.AUS Owner's Manual page 107

Auto Power Off
You can choose whether to use the 4 Hours Off feature.
y y
You can set this option to 4 Hours or Off.
y y
If you set this option to 4 Hours, the product turns off when you have not pressed any buttons on the remote
y y
control for 4 hours.
If you set this option to Off, the 4 Hours Off feature becomes disabled.
y y
Set this option to Off when you use the product for a long period of time.
y y
DPM
You can configure the DPM (Display Power Management) function.
y y
Off: you can set this option to Off, 5 sec./10 sec./15 sec./1 min./3 min./5 min./10 min.
y y
If this option is not set to Off, the monitor set enters the DPM mode when there is no input signal.
y y
If you set this option to Off, the DPM function is disabled.
y y
In the following cases, you can set DPM to Off or 10 min only. If DPM was set to 5 sec, 10 sec, 15 sec, 1 min, or 5
y y
min, it will be changed to 10 min.
- When USB Auto Playback is set to Photo or Movie
- When Fail Over is set to Auto or Manual
Baud rate (9600/115200)
You can change the RS-232 communication speed for controlling your monitor.
y y
You can choose 9600 or 115200.
y y
If you set this option to 9600, the RS-232 communication speed is set at 9600 bps.
y y
If you set this option to 115200, the RS-232 communication speed is set at 115200 bps.
y y
OSD Portrait Mode (Off, On)
Rotates the OSD counterclockwise.
y y
You can set this option to On or Off.
y y
If you set this option to Off, the function is deactivated.
y y
If turned On, the OSD will rotate 90 degrees counterclockwise. In this case, you can not use a mouse.
y y
Check Screen
The Check Screen feature judges whether there are abnormalities at the edges of the screen. R, G, and B OSDs
y y
are formed on the screen at one second intervals and an RGB Sensor tests the areas.
If set to On, the Check Screen feature is enabled.
y y
If set to Off, the Check Screen feature is disabled.
y y
When the Portrait mode is On, the Check Screen feature is Off and deactivated.
y y
5