Functions Menu; Excessive Temperature Alarm - AEG A80230GT User Manual

24
Control panel
You confirm the choice of the temperature by pressing the Confirmation button. Then the
indicator shows again the inside compartment temperature.
The newly selected-temperature must be reached after 24 hours.
After a long period out of use it is not necessary to set again the temperature because it
remains stored.
WARNING!
During the stability period by the first starting the temperature displayed can not corre-
spond to the setting temperature. During this time it is possible that the temperature
displayed is different than the setting temperature.
Difference between the temperature displayed and temperature setting is normal. Espe-
cially when:
• a new setting has recently been selected
• the door has been left open for a long time
• warm food has been placed in the compartment
Difference until 5°C inside the compartment are quite normal.
During normal functioning the indicator shows the warmest temperature inside the com-
partment.

Functions Menu

By activating the Function button the functions menu is operating. Each function could be
confirmed by pressing Confirmation button . If there is no confirmation after some seconds
the display will go out from the menu and return in normal condition. The following func-
tions are indicated:

Excessive temperature alarm

Child Lock function
Eco Mode function
Frostmatic function
Drinks Chill function
Excessive temperature alarm
An increase in the temperature in a compartment (for example due to an power failure) is
indicated by:
• flashing temperature
• flashing of the icon
• sounding of buzzer
When normal conditions are restored:
• the acoustic signal shuts off
• the temperature value continues to flash
When you press the Confirmation button to de-activate the alarm, the highest temperature
reached in the compartment appears on indicator
Then it returns on the normal operation showing the temperature of the selected com-
partment.
During the alarm phase, the buzzer can be switched off by pressing the Confirmation button.
Possible causes of alarm:
for some seconds.