Biostar M7VIQ Bios Setup Manual page 25

M7VIQ BIOS Setup
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem) awakens the system from a soft off state.
The Choices: Disabled (default), Enabled.
RTC Alarm Resume
This function is for setting date and time for your computer to boot up. During
Disabled, you cannot use this function. During Enabled, Choose the Date and
Time Alarm:
Date (of Month) Alarm You can choose which month the system will boot
Time (hh:mm:ss) Alarm You can choose shat hour, minute and second the
Note: If you have change the setting, you must let the system boot up until it
oes to the operating system, before this function will work.
Reload Global Timer Events
Reload Global Timer Events are I/O events whose occurrence can prevent the system from
entering a power saving mode or can awaken the system from such a mode. In effect, the
system remains alert for anything, which occurs to a device, which is configured as Enabled,
even when the system is in a power down mode.
VGA
LPT & COM
HDD & COM
PCI Master
up.
system will boot up.
off (default), on.
LPT/COM (default), COM, LTP, None.
On (default), off.
Off (default), on.
24