Getting Acquainted - Kenwood NEXEDGE NX-820HG Instruction Manual

FRONT AND REAR VIEWS
a b
d ef
a
(Power) switch
Press to switch the transceiver ON or OFF.
b
/ keys
Press to activate their programmable functions {page 5}.
c
/ keys
Press to activate their programmable functions {page 5}.
d TX/RX Indicator
Lights red while transmitting and green while receiving a signal. Flashes orange when
receiving an optional signaling call.
e Microphone jack
Insert the microphone plug into this jack.
f Status Indicator
Lights blue during a specifi ed mode, based on dealer programming.
/ S / A / <B / C> / ■ keys
g
Press to activate their programmable functions {page 5}.
h Speaker
Internal speaker.
i PTT switch
Press this switch, then speak into the microphone to call a station.
j RF antenna connector
Connect the RF antenna to this connector.
k ACC connector
Connect the ACC to this connector, via the KCT-60.
l External speaker jack
Connect an external speaker to this jack.
m GPS antenna connector <NX-720HG/ NX-820HG/ NX-920G only>
Connect the KRA-40 GPS antenna to this connector.
n Power input connector
Connect the DC Power Cable to this connector.

GETTING ACQUAINTED

c
g
h
j
i
k l
m
n
3