Leveling The Appliance; Assembling The Anti-Rat Cover (Optional) - LG WT17 SBP Series Owner's Manual

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable
and resting on the floor and then check that the
appliance is perfectly level.
Diagonal Check
• When pushing down the edges of the appliance
top plate diagonally, the appliance should
not move up and down at all (Check both
directions). If the appliance rocks when pushing
the machine top plate diagonally, adjust the feet
again.
NOTE
• Timber or suspended type flooring may
contribute to excessive vibration and unbalance.
• If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
• If the washing machine is installed on a uneven,
weak or tilted floor causing excessive vibration,
spin failure or error can occur. It must be
placed on a firm and level floor to prevent spin
failure.
Assembling the Anti-Rat
Cover (Optional)
Insert the Anti-Rat cover to the assembling hole
from the front or back of the washing machine.
Type 1
Type 2
EN
17