Biostar I865G-M7 User Manual page 14

JPANEL1: Front Panel Header
This 24-pin connector includes Power-on, Reset, HDD LED, Power LED,
Sleep button, speaker and IrDA Connection. It allows user to connect
the PC case's front panel switch functions.
SLP
2
1
Pin Assignment
1 +5V
3 N/A
5 N/A
7 Speaker
9 HDD LED (+)
11 HEE LED (-)
13 Ground
15 Reset control
17 N/A
19 N/A
21 +5V
23 IRTX
JCMOS1: Clear CMOS Header
By placing the jumper on pin2-3, it allows user to restore the BIOS safe
setting and the CMOS data, please carefully follow the procedures to
avoid damaging the motherboard.
JCMOS1
Pin 1-2 close
Pin 2-3 close
※ Clear CMOS Procedures:
1. Remove AC power line.
2. Set the jumper to "Pin 2-3 close".
3. Wait for five seconds.
4. Set the jumper to "Pin 1-2 close".
5. Power on the AC.
6. Reset your desired password or clear the CMOS data.
I865G-M7
PWR_LED
IR
On/Off
-
+ +
24
23
-
+
SPK RST
IR
HLED
Function Pin
2
Speaker 4
Connector
6
8
10
Hard drive
LED
12
Reset 14
button
16
18
20
IrDA
22
Connector
24
Normal Operation (Default).
Clear CMOS data.
12
JPANEL1
Assignment Function
Sleep control
Sleep
button
Ground
N/A N/A
Power LED (+)
Power LED
Power LED (+)
Power LED (-)
Power button Power-on
button
Ground
Key
Key
IrDA
Ground
Connector
IRRX
Assignment