Audio Language Preference - Philips HFL5014 Series Professional Installation Manual

6.15.3

Audio Language Preference

o Navigate to the [Sound] [Advanced]
menu
o You will see below items:
o [Surround Mode]: Select the sound
effect for the internal TV, you can
choose [Stereo] or [DTS TruSurround]
o [Auto
TruVolume] or [Night mode] if you
want to enable to level out sudden
volume differences or [Off] if you want
to disable
o [Clear Sound]: Select if you want to
enable Clear Sound to improve the
sound for speech [On] or [Off] if you
want to disable
o [Audio Out Format]: Set the audio out
signal of the TV to fit with the sound
capabilities of the connected Home
Theatre
(uncompressed)],
[Multichannel (bypass)] or [Dolby
Digital Plus]
o [Audio Out Leveling]: Select the level
out of the volume of the Home Theatre
System and the TV when switching
over from one to the other to [More],
[Medium] or [Less]
o [Audio Out Delay]: Switch the delay if
a sound delay is set on the Home
Theatre System to [On] or [Off]
o [Audio Out Offset]: Set an audio offset
by changing the slider value if you
cannot set a sound delay on the Home
Theatre System
Note: This can only be changed if
[Audio Out Delay] is set to [On]
o Navigate
to
Preference] menu
o You will see below items:
o [Primary Audio]: Select the highest
preference for audio language in
broadcast
o [Secondary Audio]: Select the next
preference for audio language in
broadcast
Note: For all the above items, make
your selection and press "OK" to
confirm you selection
- 66 -
volume]: Select
System to [Stereo
[Multichannel],
the [Audio Language
[DTS