Improper Scaled Channel Logo In The Channels Overview; Channellist.xml In The Clone File - Philips HFL5014 Series Professional Installation Manual

Below screenshot is a typical example how the ChannelList.xml will look like.
<Channel>
<Broadcast medium="dvbc" frequency="298000" system="WestEurope" serviceID="1103" ONID="1" TSID="11" PLP="0"
modulation="auto" symbolrate="6875000" bandwidth="Auto" servicetype="TV"
<Setup presetnumber="2" name="één HD" blank="0" skip="0" FreePKG="1" PayPKG1="0" PayPKG2="0"
logo="file://default/3917.png" TTV1="0" TTV2="0" TTV3="0" TTV4="0" TTV5="0" TTV6="0" TTV7="0" TTV8="0" TTV9="0" TTV10="0"
</Channel>
<Channel>
<Broadcast medium="dvbc" frequency="298000" system="WestEurope" serviceID="1103" ONID="1" TSID="11" PLP="0"
modulation="auto" symbolrate="6875000" bandwidth="Auto" servicetype="TV"
<Setup presetnumber="2" name="één HD" blank="0" skip="0" FreePKG="1" PayPKG1="0" PayPKG2="0"
logo="file://custom/eenhd.png" TTV1="0" TTV2="0" TTV3="0" TTV4="0" TTV5="0" TTV6="0" TTV7="0" TTV8="0" TTV9="0" TTV10="0"
</Channel>

Make sure all changes are saved and Clone in the new clone file in the TV

When the clone in has finished, close the dialog, extract the USB stick and view the new
channel logos.
12.1.3

Improper scaled channel logo in the Channels overview

The Home screen and Channels overview use the same channel logo file but for the Channels overview,
the logo is downscaled to 136x104. This automatic down scaling can lead to improper logos in the
Channels overview, which can be avoid by adding a custom downscaled channel logo.
To do this the channel logo file must be in both the parent and "highRes" folder of the "ChannelLogos"
folder. See below example:

The "Philips.png" file is not available in the "highRes" folder of the custom channel logos folder
and thus the TV will down scale the "Philips.png" file found in the parent folder for the
Channels overview

If the png file is available in both the parent and "highRes" folders and thus the TV will use the
"highRes" png file for the Home screen and the parent png file for the Channels overview
ChannelList
ChannelLogos
ThemeIcons

12.2 ChannelList.xml in the clone file

After you have set your settings correctly you can clone TV to USB to change the channel list. The
channellist can be edited via CMND or you can do this using an xml editor tool.
The folder name used in the root of the USB device containing the clone data:
TPM181HE_CloneData/MasterCloneData/
Go to the ChannelList.xml file: .../MasterCloneData/ChannelList/ChannelList.xml to edit the channel
list manually.
In below example, the file after a virgin installation:
custom: referred as the parent folder for custom channel logos
highRes
Philips.png: logo, which will be used in the Home screen and
Channels overview
custom
default
/>
/>
- 126 -
/>
/>