Installation; Hardware Installation - BenQ FP882 User Manual

Installation

Hardware Installation

A. Make sure that the computer and monitor's power are both turned off. Please follow
the steps to install your LCD monitor.
1 . Connect the signal cable and power cord to BenQ LCD monitor.
2 . C
onnect the audio cable to the Audio Input of BenQ LCD monitor.
B. Connect the signal cable to the VGA output of the graphics card on the computer.
C. Connect the audio cable to your computer.
D. Connect the power cord at the back of the monitor to an AC power socket. Please
make sure that the socket is not blocked or covered, so you can disconnect the unit
from AC supply if you need to. Your monitor is equipped with an automatic power sup-
ply for a voltage range from 100 to 240 Volt at a frequency of 50 to 60 Hz. Be sure that
your local power is within the supported range. If you are unsure, ask your electricity
supplier.
E. A USB-Hub is integrated in the base of your monitor pedestal. USB connectors auto-
mate peripheral connection by using plug&paly installation procedures.
1. Connect your USB Hub to your computer with USB cable.
2. Connect USB compatible devices such as a keyboard, mouse and so on to any of 2
downstream connectors.
BenQ LCD Color Monitor User's Guide
English 6