Table of Contents
Advertisement
en Cleaning and servicing
Cleaning the base unit
You can remove any visible dirt in the
base unit.
CAUTION
Risk of cutting!
Touching sharp edges on the heat
exchanger may lead to cuts.
Do not touch the fins on the heat
▶
exchanger.
Open the base unit → Page 35.
1.
Use a soft brush to clean the heat
2.
exchanger cover.
Make sure that you remove all dirt
from the seal.
Carefully clean the fins on the heat
3.
exchanger with a vacuum cleaner
and brush attachment.
Ensure that you vacuum the fins
from top to bottom so that they do
not become deformed or dam-
aged.
36
Clean the opening with a soft,
4.
damp cloth.
Close the base unit → Page 36.
5.
Closing the base unit
Requirement: The base unit is open.
→ "Opening the base unit", Page 35
Insert the heat exchanger cover by
1.
the handle.
Close the lever for the heat ex-
2.
changer.
Advertisement
Table of Contents
