Table of Contents
Advertisement
UsInG THE PRoJECToR
Display 3D menu
3D mode
‡
Off:
Select "Off" to turn off 3D mode.
‡
DLP-Link: Select "DLP-Link" to use optimized settings for DLP Link 3D Glasses.
‡
VESA 3D: Select "VESA 3D" to use optimized setting for VESA 3D Glasses.
3D -> 2D
‡
3D: Display 3D signal.
‡
L (Left): Display the left frame of 3D content.
‡
R (Right): Display the right frame of 3D content.
3D format
‡
Auto: When a 3D identification signal is detected, the 3D format is selected automatically.
‡
SBS: Display 3D signal in "Side-by-Side" format.
‡
Top and Bottom: Display 3D signal in "Top and Bottom" format.
‡
Frame Sequential: Display 3D signal in "Frame Sequential" format.
notee:
‡
"3D Format" is only supported on 3D Timing on page
‡
"3D Format" is only supported on non-HDMI 1.4a 3D timing.
3D sync. Invert
‡
Press the "On" to invert left and right frame contents.
‡
Press the "Off" for default frame contents.
Exit
Choose "Exit" to exit the menu.
DIsPLaY
3D Mode
3D Format
3D Sync. Invert
Off
Auto
Off
E xi t
69.
39
English
Advertisement
Table of Contents
