Using The Battery; Installing The Battery; Removing The Battery; Charging The Battery - Audiovox CDM-8100PP User Manual

TX-20B USER MANUAL06/28 01.6.28 12:20 PM 페이지14

USING THE BATTERY

INSTALLING THE BATTERY

1 u
Insert the bottom of battery into the groove at
the bottom of the handset. Then
top of the battery until it snaps.
v

REMOVING THE BATTERY

1 u
Push the tab with one hand and lift the top
v
of the battery to separate.
v
u
The battery must be correctly placed in the battery com-
partment. If battery is incorrectly inserted, the handset
will not turn on or the battery may slip out during use.
[6]

POWER CONNECTION

1
v
press in the
u

CHARGING THE BATTERY ONLY

1

CHARGING THE BATTERY

Connect the charger to a standard 120V AC outlet.
The LED will light green when the power is connected.
To charge the battery only, insert the battery pack
into the charging slot on the charger.
The LED will indicate the charging status.
l
Red indicates charging is in progress
l
Green indicates charging is complete
• Battery is not charged when you purchase the product.
• Fully charge the battery before use.
[7]