Removing/Assembling The Refrigerator - LG LSXS26326S Owner's Manual

Hide thumbs Also See for LSXS26326S:
Table of Contents

Advertisement

Removing/Assembling the
Refrigerator Door Handles
NOTE
• When it is necessary to move the refrigerator
through a narrow opening, removing the
doors is the recommended procedure. If it
is necessary to remove the handles, follow
the directions below. The appearance of the
handle may vary from what is shown in the
illustrations.
Removing the Handles
1
Loosen the set screws with a 3/32 in. Allen
wrench and remove the handle.
2
Loosen the mounting fasteners that connect
to the refrigerator door and handle using a
¼ in. Allen wrench, remove the mounting
fasteners.
Mounting
Fasteners
Assembling the Handles
1
Assemble the mounting fasteners at both
ends of the handle using a ¼ in. Allen
wrench.
2
Place the handle on the door by tting
the handle footprints over the mounting
fasteners and tightening the set screws
with a 3/32 in. Allen wrench.
Mounting Fasteners
Set Screw
Allen Wrench
Removing and replacing
refrigerator doors
WARNING
Excessive Weight Hazard:
• Use two or more people to remove and install
the refrigerator doors. Failure to do so can
result in back or other injury.
Electrical Shock Hazard
• Disconnect the electrical supply to the
refrigerator before installing. Failure to do so
could result in serious injury or death.
• Do not put hands, feet or other objects into
the air vents or bottom of the refrigerator. You
may be injured or receive an electrical shock.
Removing the Left (Freezer) Door
with Water Line Connection
1
Disconnect the 2 water line connections,
located on the back of the refrigerator.
Hold the water supply connection and
gently push the collet to detach the water
supply line as shown.
CAUTION
• Before you start, take out the food and remove
the door trays.
2
Open the door. Remove the top hinge cover
screw
.
3
Use a flat-blade screwdriver to pry back the
hooks (not shown) of the hinge cover from the
top of the refrigerator cabinet. Lift up the cover.
4
Disconnect all the wire harnesses
remove the hinge cover
INSTALLATION
15
and
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents