Sources; Sources List; Easylink - Philips 42PUS7809 User Manual

11

Sources

11.1

Sources list

In the list of connections - the Source menu - you can find the
devices connected to the TV. From this Source menu, you can
switch to a device.
Sources menu
To open the Sources menu, press  SOURCES.
To switch to a connected device, select the device with the
arrows  (left) or  (right) and press OK.
For some devices (HDMI-CEC devices), you can select an
activity directly in the list underneath the device icon.
Select the device and select an activity and press OK.
To close the Source menu without switching to a device,
press  SOURCES again.
Automatic detection
When you connect a new device to the TV, the device is
detected automatically and put in the Sources menu. The device
is shown as an icon (the device type) and has a name. If the
device type does not correspond with the device, e.g. the TV
says it is a player but it is not, you can change the type.
To change the type of the device, press
select a type that fits the device and press OK.
If the name does not fit the device or you want to give the
device a name of your own, press
control keypad to enter a new name.
An appropriate device type helps you in using the device. The
device type determines picture and sound styles, resolution
values, specific settings or the position within the Sources menu.
When you connect a new device to the TV, the icon of the
device jumps to the front of the Sources menu.
If the TV does not detect the device automatically, select the
connection you used to connected the device and adjust the
Device type and name.
Original name and icon
To restore the device icon to its original name and type icon,
press  OPTIONS. Select the Original name and icon and
press OK.
Scan connections
To rescan all TV connections and update the Sources menu,
press  OPTIONS. select Scan connections and press OK.
 Change type and
 Rename. Use the remote
11.2

EasyLink

With EasyLink you can operate a connected device with the TV
remote control. EasyLink uses HDMI CEC to communicate with
the connected devices. Devices must support HDMI CEC and
must be connected with an HDMI connection.
For more information, press
up EasyLink.
44
 Keywords and look