Makita UR007G Instruction Manual page 13

To prevent the switch trigger from being accidentally
pulled, a lock-off lever is provided. To start the tool,
depress the lock-off lever and pull the switch trigger.
The tool speed increases by increasing pressure on the
switch trigger. Release the switch trigger to stop.
UR006G
2
► 1 . Lock-off lever 2. Switch trigger
UR007G
2
► 1 . Lock-off lever 2. Switch trigger
Speed adjusting
You can select the tool speed by tapping the main
power button. Each time you tap the main power button,
the level of speed will change.
1
2
► 1 . Speed indicator 2. Main power button
Speed indicator
1
Automatic Torque Drive Technology
When you turn on the Automatic Torque Drive
Technology (ADT), the tool runs at optimum rotation
speed and torque for the condition of grass being cut.
To start ADT, press and hold the reverse button until the
ADT indicator turns on. After that, tap the main power
button to select the cutting tool attached to the tool.
Light the lamp beside
and plastic blade,
1
head.
To stop ADT, press and hold the reverse button until the
ADT indicator turns off.
4
► 1 .
4. Main power button 5. Reverse button
Indicator
13 ENGLISH
Mode
High
Medium
Low
marking to select cutter blade
marking to select nylon cutting
1
2
marking 2. marking 3. ADT indicator
Mode Cutting tool
ADT(Cutter Cutter blade
blade) Plastic blade
ADT(Nylon Nylon cutting
cutting head) head
Rotation speed
-1
0 - 7,000 min
-1
0 - 5,500 min
-1
0 - 4,600 min
3
5
Rotation
speed
3,500 - 7,000
-1
min
3,500 - 5,500
-1
min