Beacon Maintenance - ACR Electronics ResQLink 410 RLS Product User Manual

False Alert
A 406 MHz false alert MUST be reported to the search and rescue authorities.
To report a 406 MHz false alert in the United States, contact:
United States Air force Rescue Coordination Center (AFRCC)
Telephone: 1-800-851-3051
To report a false alert outside of the United States, contact the national authority
where your beacon is registered. False alerts in Canada, notify the Canadian Mission Control
Center by calling 1-800-211-8107. False alerts in Australia, inform the Australian Maritime
Safety Authority, Joint Rescue Coordination Centre (JRCC Australia) and false alerts in New
Zealand, inform the Rescue Coordination Centre New Zealand (RCCNZ).
Reporting
Should there be a false alert for any reason, it must be reported to the nearest search and rescue
authorities. The information that should be reported includes:
• The PLB's 15-digit Unique Identifier Number (UIN). Also identified as the 15-digit Hex ID
• Time and date
• Duration and cause of activation
• Location of beacon at the time of activation
Routine Maintenance
Carefully inspect the beacon case for any visible cracks. Cracks may admit moisture, which
could falsely activate the beacon or otherwise cause a malfunction. Any cracks observed should
be immediately referred to ACR for evaluation by calling +1 (954) 862-2110. ACR Technical
Support can also be reached by sending an email to: service@acrartex.com.
After checking the beacon for cracks, it may be wiped down with a clean, damp cloth. Do not
use any type of cleaner on your beacon.
Y1-03-0362 Rev. A

Beacon Maintenance

Company Confidential 22