Installation Instructions; Removing Shipping Bolts; Location Of Your Washer - Asko WL6532 XXL Operating Instructions Manual

Installation Instructions

Read these instructions carefully and
completely before you install the machine.
The installation should be carried out by a
qualified person who is familiar with all local
codes and ordinances for electrical and
plumbing connections. Cosmetic damage
must be reported to your dealer within five
days from the date of purchase.
After unpacking the washer, thoroughly
check the unit for cosmetic damage.

Removing shipping bolts

1. Before operating the washer, remove
the shipping bolts(4 ea.) along with the
rubber grommets.
• If the bolts are not removed, it may
cause heavy vibration, noise and
malfunction.
2. Unscrew the 4 bolts with the wrench
supplied. Keep the 4 bolts, grommets,
and wrench for future use.
• Whenever the appliance is
transported, the transit bolts must be
reused.
24
3. Close holes with supplied cap holders.

Location of your washer

• Check location where the washer will be
installed. Make sure you have everything
necessary for correct installation.
• Do not place or store your washer below
32 °F (0 °C) to avoid any damage from
freezing.
• Do not place or store laundry products
on top of washer at any time.
• Install the washer on a horizontal
solid floor. If the washer is installed
on an unsuitable floor, it could make
considerable noise, vibrate severely and
cause a malfunction. If the washer is not
level, adjust the leveling legs up or down
to make the unit level.
• Ventilation openings must not be
obstructed by carpeting when the
washer is installed on a carpeted floor.
• Leave some space. There should be at
least 1/2" clearance on all sides of the
unit.
Customer Care Center
1-800-898-1879
www.askousa.com
Drain Hose
Drain Hose
Washer
Drain Hose
Drain Hose
Washer
Washer
Washer
Laundry
Laundry
Tub
Laundry
Tub
Laundry
approx. Tub
approx.
Tub
approx.
1/2" 12mm
1/2" 12mm
approx.
1/2" 12mm
1/2" 12mm