Page 1
Universal 180 W High Power Laptop Charger NS-PWL9180 Note: the tips shown in this manual are for illustrative purposes only and may not reflect the actual product. Before using your new product, please read these instructions to prevent any damage.
Universal 180 W High Power Laptop Charger Safety information • Do not expose the power adapter to rain, moisture, or excessive dust. It may cause shock hazards. • Do not operate the adapter in direct sunlight. • Operate the adapter in a well ventilated area. Maximum ambient temperature around the power adapter must not exceed 93.2°...
Use the Tip Wizard to locate the manufacturer and model and you can order your complementary tip. If you are unable to locate your laptop on the Tip Wizard or need assistance contact Insignia customer service at (877) 467-4289.
Page 5
Universal 180 W High Power Laptop Charger Connect the tip to the end of the output cable, making sure that the pins on the tip are aligned with the holes in the cable. The ridge on the inside of the tip should align with the groove in the output cable connector.
Tip Wizard. If you are unable to locate your laptop in the Tip Wizard, contact Insignia customer service at (877) 467-4289. How do I connect the tip to the adapter cable?
Page 7
If I leave my adapter plugged in when I'm not using it does it waste energy? Your Insignia adapter meets EnergyStar and CEC VI energy requirements which means it is an energy-efficient product designed to conserve power. When your adapter is plugged in and not being used it draws less than 0.5 W of power.
NS-PWL9180 Specifications AC wall socket input cable 6 ft. (includes charger) DC power output cable 4 ft. AC input voltage 100~240 V~2.5 A 50-60 Hz DC output voltage 19 Volts DC DC output current 9.47 Amps maximum continuous Output power...
Page 9
Universal 180 W High Power Laptop Charger • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced technician for help. FCC warning Changes or modifications not expressly approved by the party responsible for compliance with the FCC Rules could void the user’s authority to operate this equipment.
Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts.
Page 11
• Damage due to incorrect operation or maintenance • Connection to an incorrect voltage or power supply • Attempted repair by any person not authorized by Insignia to service the Product • Products sold “as is” or “with all faults”...
Need help?
Do you have a question about the NS-PWL9180 and is the answer not in the manual?
Questions and answers