At The End Of The Programme - AEG LAVAMAT 12820 Operating Instructions Manual

How to wash
If the delay start option has been selected, the machine starts its
countdown, in hours, which will appear on the display. During this
period it is possible to load other laundry, to modify or cancel the
delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Modify or cancel the delay time: press the START/PAUSE button.
Press the DELAY START button
on the display, or 0h, if you wish to cancel it. Press the START/
PAUSE button again.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and
appears on the display.

At the end of the programme

The machine stops automatically. A zero appears on the display. An
acoustic signal is clearly audible. The light
programme progress display.
If the
emptied out before opening the door either
- by pressing the START/PAUSE button (the laundry will be spun at the
speed corresponding to the selected type of fabrics. The spin speed
can be reduced by means of the SPIN SPEED button)
- or by selecting the SPIN SPEED and depressing the START/PAUSE
button
- or by turning the selector dial to O and then to DRAIN "C" and
pressing the START/PAUSE button again. In this case the water will be
emptied, but the laundry is not spun.
28
(RINSE HOLD) option has been selected, the water must be
until the time required appears
(END) comes on in the