Cancelling A Programme; Altering A Programme Which Is Running; Opening The Door After The Programme Has Started - AEG LAVAMAT 12820 Operating Instructions Manual

Description of the appliance

Cancelling a programme

To cancel a programme which is running, turn the programme selector
dial to the RESET O position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option
the DRAIN programme "C".

Altering a programme which is running

To alter a programme, first set the machine to PAUSE by pressing the
START/PAUSE button
Any function can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.

Opening the door after the programme has started

To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:
• the machine is not already heating or drying;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
The light
be opened:
• green light: the door can be opened;
• unlit light: the door cannot be opened;
• flashing red light: the door is open.
16
), turn the selector dial first to O and then to
.
(DOOR) on the control panel indicates if the door can