Table of Contents
Advertisement
Available languages
Available languages
English
Fig. C
17
One-Touch
TM
setting guard Adjustment Options
To adjust the guard release lever
adjustment option:
1. Remove screw
using a T20 bit.
16
2. Remove the guard release lever taking note of the
spring position. Choose the end of the lever for the
desired adjustment option. One-touch will use the
slanted end of the lever
15
holes
13
on the guard collar. Two-touch will use the
squared end to engage the alignment holes
guard collar.
3. Replace the lever, positioning the chosen end under the
spring
17
. Ensure the lever is in proper contact with
the spring.
4. Replace screw and torque to 2.0-3.0N-m. Ensure proper
installation with spring return function by depressing
guard release lever
.
15
Mounting guard (Fig. D)
CAUTION: Prior to mounting guard, ensure the screw,
lever, and spring are fitted correctly before mounting
the guard.
1. With the spindle facing the operator, press and hold the
guard release lever
.
15
2. Align the lugs
12
on the guard with the slots
the gear case cover.
3. Push the guard down until the guard lugs engage
and rotate them in the groove on the gear case cover.
Release the guard release lever.
8
16
15
Two-Touch
TM
15
for desired
to engage the alignment
on the
13
18
on
4. To position the guard:
One-touch
TM
: Rotate the guard clockwise into the
desired working position. Press and hold the guard
release lever
15
to rotate the guard in the counter-
clockwise direction.
Two-touch
: Press and hold the guard release
TM
lever
15
. Rotate the guard clockwise or counter-
clockwise into the desired working position.
nOTE: The guard body should be positioned between
the spindle and the operator to provide maximum
operator protection.
The guard release lever should snap into one of the
alignment holes
13
on the guard collar. This ensures
that the guard is secure.
5. To remove the guard, follow steps 1–3 of these
instructions in reverse.
Fig. D
11
18
To Adjust the heavy-Duty Cut-off guard (Fig. D, E)
When application allows and/or greater guard coverage
is preferred, the outer guard
by pressing the guard opening adjustment lever
rotating the outer guard to the desired position.
Fig. E
Gear Case Orientation
DWE46266N is sold with the spindle-side of the gear case
facing to the left relative to the switch or trigger facing
down. This position is ideal for cutting applications. The
gear case can be repositioned to a different orientation if
preferred by the user.
CAUTION: Do not reposition the gear case when
using the stock adjustable cut-off guard.
12
13
15
can be adjusted closed
11
and
9
9
Advertisement
Table of Contents
