Alpine TME-M710 Owner's Manual page 9

q Beep tone setting (BEEP)
ON : Beep tone sounds to inform you that the
operation is accepted, when you press
the button etc.
w External input sound level adjustment
(AUX IN-1 LEVEL/AUX IN-2 LEVEL)
HIGH : Sets the sound level at a high level.
LOW : Reduces the sound level.
e Navigation settings (NAV. IN)
When the navigation is connected to the
RGB terminal, set to ON.
r Guide control setting (GUIDE CONTROL)
It is audio interruption setting for the
navigation system.
Be sure to set to "STANDARD".
• The setting can be made only when ON is
set in "e Navigation settings (NAV. IN)".
3
After completing adjustments, press and hold
the SELECT button for at least 2 seconds.
The screen will return to the normal mode.
• If no operation is made for 10 seconds after
selecting a mode to be adjusted, the adjustment
mode will be cleared.
EN
7
-EN