About The Remote Control - Aiwa AV-D57 Operating Instructions Manual

ABOUT THE REMOTE CONTROL

Inserting batteries
Detach the battery cover on the rear of the remote control and
insert two R6 (size AA) batteries.
When to replace the batteries
The maximum operational distance between the remote control
and the sensor on the unit should be approximately 5 meters
(16 feet). When this distance decreases, replace the batteries
with new ones.
Using the remote control
The instructions in this manual refer mainly to the buttons on the
main unit.
Some buttons have two functions.
• To use the function indicated on the button, or on the plate in
black, simply press the button.
• To use the function indicated on the plate in green, press the
button while pressing the SHIFT button.
Important
• The ENTER button on the remote control does not
substitute for the ENTER button on the main unit. This
button is for operating the DVD player only (see right
column.)
• In principal, the TUNING UP and DOWN buttons on the
remote control substitute for N and M buttons on
the main unit. Press the button while pressing the SHIFT
button.
To select the function (audio source) with the remote
control
Press the FUNCTION button repeatedly. The function changes
cyclically.
NOTE
• If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
• The remote control may not operate correctly when:
- The line of sight between the remote control and the remote
sensor in the display window is exposed to intense light, such
as direct sunlight.
- Other remote controls are used nearby (those of a television,
etc.)
Operating AIWA CD or DVD players with the remote
control
You can control the basic functions of AIWA CD or DVD players
with the remote control. In principle, the buttons described below
have the same function as those on the DVD or CD players.
For more details, refer to the operating instructions of the player.
Operating DVD and CD players
Press the following button.
l/a - Starts playback. The button pauses CD playback as well.
f,g - Searches a track. Hold the button down.
r,t - Skips a track of the CD. Press the button repeatedly.
s - Stops playback.
Operating DVD players
Press the following button while pressing the SHIFT button.
i,k,j,l (up, down, left or right) button - Moves the cursor to
select a program etc.
AUDIO button - Changes an audio track (language etc.)
ENTER button - Enters the selected program etc.
TITLE or MENU button - Enters the title or menu screen.
RETURN button - Returns to the previous mode etc.
DVD PAUSE - Pauses the playback of a DVD.
Operating CD players
Press the following button.
DISC SKIP (CD) - Skips a disc in the CD changer.
En En En En En
E E E E E
(Españo (Españo
(Españo (Españo (Españo
F F F F F
(França (França
(França (França (França
6
ENGLISH