Cleaning and maintenance
en
Filter in the water supply is
blocked
Release water pressure in the supply
hose:
Turn off the water tap.
1.
Select the Cottons (activate
2.
varioSpeed setting) programme.
If your appliance with
Note:
intelligent dosing system
need to deactivate the intelligent
dosing system.
Select the Start Reload button.
3.
Allow the programme to run for
approx. 40 seconds.
Turn the programme selector to
4.
Û (Off).
Pull out the mains plug.
5.
Clean the filters:
Disconnect the hose from the rear of
1.
the appliance.
Use pliers to remove the filter.
2.
*
Depending on the model
44
3.
, you also
*
4.
Clean the filter with a small brush.
Connect the hose and check for
leaks.