Table of Contents
Advertisement
3 Change settings
This section helps you change the settings of
this player.
1
2
D C ENU
3
Note
•
You cannot change a menu option that is grayed out.
•
To return to the previous menu, press . To exit the
menu, press
.
Picture
1
Press .
2
Select [Setup] > [Video] to access the
video setup options.
•
[TV display]: Select a picture display
format to fit the TV screen.
[HDMI video]: Select an HDMI video
•
resolution.
[HDMI Deep Color]: Display colors
•
with more shades and hues when the
video content is recorded in Deep
Color and the TV supports this feature.
•
[Picture settings]: Select a predefined
color setting.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Sound
1
Press .
2
Select [Setup] > [Audio] to access the
audio setup options.
•
[Night mode]: Select quiet or full
dynamic sound. Night mode decreases
the volume of loud sound and
increases the volume of soft sound
(such as speech).
[HDMI Audio]: Set an HDMI audio
•
format when this player is connected
through HDMI.
•
[Digital Audio]: Select an audio format
for the sound output when this
player is connected through a digital
connector (coaxial).
[PCM Downsampling]: Set the
•
sampling rate for PCM audio output
when this player is connected through
a digital connector (coaxial).
Note
•
Night mode is only available for Dolby encoded DVD
and Blu-ray discs.
Network (installation,
status...)
1
Press .
2
Select [Setup] > [Network] to access the
network setup options.
•
[Network installation]: Start a wired
or wireless installation to make the
network work.
EN
13
Advertisement
Table of Contents
