Table of Contents
Advertisement
EasyConfig is done. When the client has adopted EasyConfig the setting, the EasyConfig LED
will be steady on. Except push button on evaluation board, user may enable the request by
click "Do EasyConfig (Button)" on web page.
Beside Button mode, user may select Q&A mode for EasyConfig. If this is first time
configuration of EasyConfig Q&A mode in AP ("Q&A Installed" item indicated as "no" in
current key info table of AP EasyConfig web page), user must check "First Time
Configuration" checkbox, and then input the answers for Question 1 and 2 in web page. After
answers are given, click "Do EasyConfig (Q&A)" button, it will begin to search for EasyConfig
Q&A mode AP. If any AP is found, the EasyConfig negotiation will be proceeded and the
setting will be adopted automatically in AP and client when EasyConfig is done.
Please note, if it is first time configuration for Q&A mode, user must remember which question
selected and which answer input because AP will save the client question and answer into
Flash memory and check it when any other client requests Q&A mod EasyConfig hereafter.
8186 System Configuration
In this section, it will show you WLAN EasyConfig setting in config file. You could find this
config file in 8186 CMK package, and you may edit the value as you want. Then, you could
re-build the firmware image with the setting you modified, and upload it to WLAN evaluation
board.
Keyword
DEF_ WLANn_EASYCFG_ENABLED
WLANn_EASYCFG_ENABLED
DEF_ WLANx_EASYCFG_MODE
WLANn_EASYCFG_MODE
DEF_WLANn_EASYCFG_ALG_REQ
WLANn_EASYCFG_ALG_REQ
DEF_WLANn_EASYCFG_ALG_SUPP
WLANn_EASYCFG_ALG_SUPP
DEF_WLANn_EASYCFG_SCAN_SSID
WLANn_EASYCFG_SCAN_SSID
Meaning
Enable/Disable EasyConfig
Indicate which configure
method used
Indicate which encryption
algorithm will be proposed
when used in client mode
Indicate which encryption
algorithms could be accepted
for client request
SSID used for EasyConfig.
Please note, EasyConfig AP
and client must be set with the
same value
47
Value
0 – disable, 1 – enable
1 – button mode, 2 – QA
mode, 3 – button+QA
4 – WPA-TKIP,
32 –WPA2-AES
4 – WPA-TKIP,
32 –WPA2-AES,
36 – Both WPA-TKIP
and WPA2-AES
SSID text string up to 31
characters
Advertisement
Table of Contents
