Table of Contents
Advertisement
(5) Wireless Security: This page allows you setup the wireless security. Turn on WEP or
WPA by using Encryption Keys could prevent any unauthorized access to your wireless
network.
3.2.3 Wireless ISP
(1) Setup Operation Mode – Wireless ISP: In this mode, all Ethernet ports are bridged
together and the wireless client will connect to ISP access point. The NAT is enabled and PCs
in Ethernet ports share the same IP to ISP through wireless LAN. You must set the wireless to
client mode first and connect to the ISP AP in Site-Survey page. The connection type can be
setup in Wan page by using PPPoE, DHCP client, PPTP client, L2TP client or static IP.
29
Advertisement
Table of Contents
