Sd Card Slot; Buttons; Connectors - Axis P39 Series User Manual

AXIS P39 Network Camera Series
Specifications
6
Microphone (AXIS P3935–LR)
7

SD card slot

8 Control button
9
Status LED
SD card slot
NOTICE NO NO TICE TICE
• Risk of damage to SD card. Do not use sharp tools, metal objects, or excessive force when inserting or removing the
SD card. Use your fingers to insert and remove the card.
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card
from the product's webpage before removal.
This product supports microSD/microSDHC/microSDXC cards.
For SD card recommendations, see axis.com.
microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are
trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both.

Buttons

Control button
The control button is used for:
• Resetting the product to factory default settings. See Reset to factory default settings on page 24.
• Connecting to an AXIS Video Hosting System service. To connect, press and hold the button for about 3 seconds until the
status LED flashes green.

Connectors

Network connector
The Axis product is available in two variants with different network connectors:
D-coded M12 connector with Power over Ethernet (PoE).
Audio connector
• Audio in – 3.5 mm input for a mono microphone, or a line-in mono signal (left channel is used from a stereo signal).
Audio input
1 Tip
Unbalanced microphone (with or without electret
power) or line
For audio in, the left channel is used from a stereo signal.
2 Ring
Electret power if selected
29
3 Sleeve
Ground