LG RC9011G2 Owner's Manual page 17

C
aring for Your Dryer
Ventilation Grille and Cool Air
Inlet Grille
Vacuum the front ventilation grill 3~4 time a year
to make sure there must be no build-up of lints or
dirts which cause improper intake air flow.
Note
- The warm air is exhausted through the
ventilation grill.
- Adequate ventilation has to be provided
to avoid the back flow of gases into the
room from appliance's burning other
fuels, including open fires.
Condensed Water Drain-out
Normally, condensed water is pumped up to water
container where water is collected until emptied.
Not only using water container, but water can be
drained out directly to drain hose especially when
dryer is stacked on top of washing machine.
With connecting kit for drain hose, you can simply
change water path and water reroute to the
drainage facility. Please follow the below steps.
1. Take
connecting
kit out.
2. Separate
water
container
hose from
the kit.
3. Connect
drain hose
to the kit.
Moisture Sensor?
This device functions to sense the moisture
remaining contents of the laundry during
operation which means it must be cleaned all
the time. The main reason of cleaning this part
is to remove the build-up of lime scale on the
surface of sensor. Wipe the sensors inside drum
(Shown in the picture).
17