Philips sonicare HX6322 Manual page 15

Note: Each of the first 14 brushings must be at least 1 minute in
length to properly advance through the Easy-start ramp-up cycle.
Activating or deactivating the Easy-start feature
1 Place the handle on the charger.
To activate Easy-start:Press and hold the power on/off button for
2 seconds. You hear 2 beeps to indicate that the Easy-start feature
has been activated.To deactivate Easy-start:Press and hold the
power on/off button for 2 seconds. You hear 1 beep to indicate that
the Easy-start feature has been deactivated.
Note: Using the Easy-start feature beyond the initial ramp-up period
is not recommended and reduces Philips Sonicare effectiveness in
removing plaque.
Cleaning
Warning: Do not clean brush heads, handle, charger, charger
cover or replaceable panel in the dishwasher.
Toothbrush handle
1 Remove the brush head and rinse the metal shaft area with warm
water. Make sure you remove any residual toothpaste (Fig. 12).
Caution: Do not push on the rubber seal on the metal shaft
with sharp objects, as this may cause damage.
2 Wipe the entire surface of the handle with a damp cloth.
35_020_9981_2_DFU-Simple_A6_v7.indd 15
15
English
11/04/16 11:46