Table of Contents
Advertisement
nokia
C
P
ONNECTING
EOPLE
CMO Operations & Logistics
WW Service Solutions & Development
Bochum / Germany
9. DISASSEMBLY INSTRUCTIONS
1.) You need the following tools.
3.) Remove the Battery Cover.
5.) Remove the D-Cover by shifting it as shown in the
picture carefully. Mind the sharp contact springs.
7.) Use the DC Plug to remove the System Connector.
Ensure that no adhesive remains.
Service Manual 8800 Level 1&2
PAGE 12 (23)
CONFIDENTIAL
2.) Always protect the window with a plastic film.
4.) Unscrew the four Torx size 6 plus screws in the
shown order. Mind the different screw lengths.
Assembly use the reverse order and the following
torques: For M1.6x4.1: 17Ncm, for 1.6x7.5: 25Ncm.
Always use new screws.
6.) Unlock the Antenna Assy, beginning from the left
side.
8.) Lever out the Vibra Motor with a slotted
screwdriver. Ensure that no adhesive remains.
Copyright © 2005 NOKIA Corporation. All rights reserved.
Approved 1.0
MGR
9.5.2005
For
Advertisement
Table of Contents
